Return shipping covered
Contiguous US
Pneumatic lift
Michigan
The Klöud
Klöud is our adjustable pneumatic standing desk for changing, equipment-heavy workspaces.
Tune the lift assistance to your setup, then move from sitting to standing in under three seconds. No motor or outlet required.
-
Frame color
- Black $0.00
- White $0.00
- Silver $0.00
-
Work surface size
- 30 × 60 in $350.00
- 30 × 48 in $300.00
- None (Frame Only) $0.00
-
Work surface finish
- Urban Oak $0.00
- Dover White $0.00
- Graphite Twill $0.00
- Neutral Twill $0.00
- Walnut $0.00
- Natural Beech Hardwood $400.00
- Mocha Beech Hardwood $400.00
- No work surface $0.00
-
Caster kit
- Add casters $55.00
-
Cable management
- Black cable kit $40.00
- White cable kit $40.00
- Silver cable kit $40.00
Return shipping covered
Contiguous US
Pneumatic lift
Michigan
Move when you feel like moving.
Pull the handle and guide the work surface. Gas springs assist the lift, so Klöud moves with your hand and stops when you release the handle. No presets or control panel.
One control. No presets, control panel, or electrical setup.
Tune the lift to your setup.
Klöud’s adjustment system lets you tune lift assistance for the combined weight of the work surface and equipment. If your setup changes, tune it again.
Adjustable when your setup changes.
Nimbus is our fixed-assistance pneumatic desk for a mostly consistent setup. Its 110 lb lift setting does not need tuning. Klöud is the adjustable alternative: tune it across a 60–150 lb total setup-weight range, then retune it when your work surface or equipment changes.
Pneumatic or electric: what changes?
Both pneumatic and electric desks raise and lower the work surface. The difference is how they feel and what they require. Klöud moves as you guide it and needs no outlet. An electric desk uses powered controls and a motor.
Control
Hand-guided movement
Powered controls
Power
No outlet required
Requires an outlet
Drive system
Gas-spring assistance
Motor and gears
Placement
No power cord
Needs access to power
Klöud specifications.
Confirm the desk fits your space, equipment, and preferred working height before choosing a configuration.
Setup weight includes the work surface and everything on it. The lift assistance is tuned to match that weight. Structural load capacity is the maximum weight the frame can safely support. Klöud has been tested to BIFMA X5.5, a commercial desk standard.
Additional information
| Adjustment type | Adjustable pneumatic assistance; no electricity required |
|---|---|
| Adjustment time | Under 3 seconds from sitting to standing |
| Height range | 28–47 in with laminate work surface and standard glides |
| Work-surface dimensions (W × D) | 48-inch laminate: 47 × 29 in |
| Frame material | Steel |
| Work-surface materials | Laminate or solid beech hardwood |
| Equipment allowance | Up to 110 lb, depending on your work surface |
| Frame weight | Approximately 80 lb, excluding work surface |
| Desk weight | Approximately 140 lb with the 60-inch laminate surface |
| Product testing | Tested to ANSI/BIFMA X5.5 |
Finishes and work surfaces.
Compare material, color, and grain before you configure the desk.
Images are representative. Color and grain change with lighting, and hardwood varies naturally.
Laminate finishes
Available with 30 × 48 in and 30 × 60 in work surfaces.
Hardwood, in motion.
Available with the 30 × 60 in work surface on Klöud and Nimbus.
Optional solid beech upgrade
Made in Michigan
Choose solid wood as an alternative to laminate. Natural Beech and Mocha Beech each show the grain and color variation of real wood.
Natural Beech
Solid beech hardwood
Mocha Beech
Solid beech hardwood
Caring for your hardwood surface
Clean gently. Dust with a soft, lint-free cloth. For a wipe-down, use a slightly damp cloth, then dry the surface right away.
Wipe up spills promptly. Blot liquids with a soft, dry cloth. Don’t leave standing water on the surface.
Protect against rings and heat. Use coasters under drinks, and avoid placing hot items directly on the wood.
Skip harsh cleaners. Avoid abrasive pads and solvent- or alcohol-based cleaning products.
Keep conditions steady. Limit prolonged direct sunlight, keep the surface away from heaters and vents, and avoid big swings in humidity.
Minor assembly, with real support behind it.
Raise and secure the folding legs, attach the feet, and fasten the work surface. Setup typically takes 15–45 minutes with one or two people. Allen wrenches and the adjustment hex key are included; bring a screwdriver.
Review shipping and returns before ordering. See the compatible Caster Set and Cable Management options.
We replace damaged or missing items.
Contact our team and we will send replacement parts or replace the affected item.
Proven through the workday.
Verified buyer · Tracy K. · April 26, 2024
The Klöud customer reviews
Interactive reviews require JavaScript and optional cookie consent.
Is Klöud right for your setup?
Klöud combines fast, hand-guided adjustment with lift assistance that can be retuned as equipment changes.
Will it fit my equipment?
Check the approximate equipment allowance for your selected work surface, then confirm the 28–47 in height range with laminate and glides in the specifications above.
Why choose pneumatic?
Klöud moves as you guide it and needs no motor, power cord, or outlet.
What if it is not right for me?
Use it for 30 days. If it is not a fit, we cover return shipping and help coordinate the return.
Read the 30-day trial and return terms.